Compaq P1210 User Manual page 18

19" Model
Group
Item
Icon
Icon
HORIZ-STATIC
MOIRE CANCEL LEVEL
CORNER PURITY(TL)
CORNER PURITY(TR)
VIDEO
CORNER PURITY(BL)
CORNER PURITY(BR)
CLAMP PULSE POSITION
POWER-SAVE
CONTROL LOCK
MISC.
OSD POSITION
Press the Minus Button
Item
To adjust the horizontal beam alignment on the full screen area.
VERT-STATIC To adjust the vertical beam alignment on the full screen area.
To decrease the level of the moire-clear wave.
To adjust the purity condition on the top-left corner.
To adjust the purity condition on the top-right corner.
To adjust the purity condition on the bottom-left corner.
To adjust the purity condition on the bottom-right corner.
To eliminate an excessive green or white-back ground that
may occur when external sync signals are applied to the
monitor.
To clamp the video signal at
the front of the H-Sync pulse.
To select 1.0V of video input.
VIDEO LEVEL
DEGAUSS
To select the constant power
consumption mode.
To permit all OSD adjustments.
To move the OSD screen position
in a counter clockwise direction.
Shows the current scanning frequency and Preset No..
DIAGNOSIS
To choose the language used on OSD.
LANGUAGE
- 7 -
ENG......English, FRA......French,
GER......German, JPN......Japanese
Press the Plus Button
To clamp the video signal at the
back of the H-Sync pulse.
To select 0.7V of video input.
To eliminate possible color shading or impu-
rity due to magnetic effects.
To select the power-save mode.
(Your computer must be set for
power management.)
To lock the OSD function except for
"BRIGHT" and "CONTRAST".
To move the OSD screen
position in a clockwise direction.
ESP......Spanish,