Compaq P1210 User Manual page 15

22" Model
Group
Item
Icon
Icon
FINE PICTURE MODE
HORIZ-CONVERGENCE
VERT-CONVERGENCE
CORNER PURITY(TL)
CORNER PURITY(TR)
CORNER PURITY(BL)
CORNER PURITY(BR)
MOIRE CANCEL
MOIRE CANCEL LEVEL
CLAMP PULSE POSITION
POWER-SAVE
CONTROL LOCK
OSD POSITION
GTF AUTO ADJUST
CONTROL LOCK: This is to lock the OSD function to keep the OSD screen image you set.
Press plus button to lock the OSD function. You can adjust only "BRIGHT" and "CONTRAST" at the condition.
Press minus button to unlock the locked condition.
GTF: This function is available when the computer has the GTF
Press the Minus Button
Item
To select the status which provides the most pleasing image.
To adjust the horizontal beam alignment on the full screen area.
To adjust the vertical beam alignment on the full screen area.
To adjust the purity condition on the top-left corner.
To adjust the purity condition on the top-right corner.
To adjust the purity condition on the bottom-left corner.
To adjust the purity condition on the bottom-right corner.
To select the Moire Cancel mode
off.
To decrease the level of the moire-clear wave.
To eliminate an excessive green or white-back ground that may
occur when both Sync-On-Green and external sync signals are
applied to the monitor.
To clamp the video signal at
the front of the H-Sync pulse.
VIDEO LEVEL To select 1.0V of video input.
DEGAUSS
To select the constant power
consumption mode.
To unlock the OSD function.
To move the OSD screen position
in a counter clockwise direction.
ALL RESET
To show the current scanning frequency, Preset No., and signal input
DIAGNOSIS
connection.
To choose the language used on OSD.
LANGUAGE
ENG.....English, FRA.....French, ESP.....Spanish,
ITA.....Italian, GER.....German, JPN.....Japanese
TM function according to the VESA
- 4 -
Press the Plus Button
To select the Moire Cancel mode
on.
To clamp the video signal at
the back of the H-Sync pulse.
To select 0.7V of video input.
To eliminate possible color shading or
impurity due to magnetic effects.
To select the power-save mode.
(Your computer must be set for
power management.)
To lock the OSD function except for
"BRIGHT" and "CONTRAST".
To move the OSD screen
position in a clockwise direction.
To restore all items to the
factory preset.
To adjust screen size, position and
distortions automatically.
® GTF TM standard.