Compaq Computer Corporation. 1999 Compaq Computer Corporation. All rights reserved. Printed in Mexico. Compaq and Deskpro are registered in the U. S. Patent and Trademark Office. Microsoft, MS-DOS, Windows, Windows NT, and other names of Microsoft Products referenced herein are trademarks or registered trademarks of Microsoft Corporation.
English Product Features The Compaq P700 Color Monitor is a microprocessor-based, high- resolution monitor with auto-scanning. The monitor features include the following: ?# 17-inch (16.0-in/40.6 cm viewable) FD Trinitron CRT ?# 1600 × 1200 resolution, plus full-screen support for lower...
Compaq platforms ensuring cross- compatibility and backward-compatibility. The resulting solution enables customers to manage and control ongoing software maintenance costs. The UDM is available on the Compaq Support Software CD for Compaq Desktop, Portable, and Workstation Products and the Compaq web site (www.compaq.com).
Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: Place the monitor in a convenient, well-ventilated location near your computer. Connect the monitor signal cable 3 to the 15-pin connector on the rear panel of the computer and tighten the screws.
WARNING: To reduce the risk of electric shock or damage to your equipment: „# Do not disable the power cord grounding plug. The grounding plug is an important safety feature. „# Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Adding a Compaq Powered USB Hub The monitor base is designed to house an optional Compaq Powered USB Hub. The Compaq Powered USB Hub is not included with the monitor. It is sold separately. For information on purchasing the Compaq Powered USB Hub (part. No. 138638-xxx), call your Compaq authorized dealer, or reseller.
Operating the Monitor No./Icon Control Reset Button Brightness or OSD Select Button Brightness or OSD Select Button Menu and Select button Contrast button Contrast button Power Switch English Front Panel Controls Function Pressing this button resets the following items: Contrast, brightness, size/center, geometry, screen, zoom, and color.
On-Screen Display Settings To adjust screen settings, press the Menu button to launch the on-screen display (OSD). The OSD can be viewed in nine available languages. The following menu shows the functions at each level: Menu Level 1 Size/Center Geometry Color Convergence Language...
How to Adjust Settings To launch the on-screen display Main Menu: Press the Menu button 3 on the monitor front panel. The Main Menu will display on the monitor screen. To select an item from the Main Menu, scroll down by pressing the down arrow button 1 located on the monitor front panel.
A second-level menu displays with and adjustment scale. Use the arrow keys to make a selection on the adjustment scale. Press the Menu 3 button to exit from that adjustment. To exit from the on-screen menu, press the Menu button again. Press Reset to restore the adjustment to its original value.
Adjusting Screen Quality The optimum screen settings are factory preset. However, to change the settings to your personal preference, allow the monitor to warm up for 30 minutes before performing the following procedures. The screen image stabilizes after a warm-up period. Optimizing Contrast For best results, set your screen to a light background (such as the Windows Desktop) before adjusting the following settings:...
Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen. Preset Modes 1. Industry Standard 2.
The video controller signal may occasionally call for a mode that is not preset if: ?# You are not using a Compaq standard graphics adapter. ?# You are not using a preset mode. If this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display.
Energy Saver Feature The energy saver feature has three different modes of operation: ?# Full Power ?# Standby/Suspend ?# Sleep By selecting settings in the computer's Energy Saver utility, you are able to determine the length of the inactivity period before the monitor goes into sleep mode.
Care and Maintenance This section explains how to care for and maintain your Compaq monitor during normal everyday use. Protecting the Monitor To protect your monitor from overheating and other types of damage, follow these suggestions: ?# Use only a power source and connection appropriate for this monitor, as indicated on the marking label/back plate.
?# Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered by the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact your Compaq authorized dealer, reseller, or service provider. Cleaning the Monitor To clean the monitor, follow these steps: Turn off the monitor and the computer.
Modifications The FCC requires the user to be notified that if any changes or modifica- tions are made to this device, not expressly approved by Compaq Computer Corporation, this may void the user's authority to operate the equipment.
For questions regarding your product, contact: Compaq Computer Corporation P.O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-652-6672 (1-800-OK COMPAQ) For questions regarding this FCC declaration, contact: Compaq Computer Corporation P.O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000...
Japanese Notice German Ergonomics Notice Compaq Computers, when tested with the Compaq PE1020 Series monitors, were evaluated and found compliant to the requirements of ZH 1/618 (German Safety Regulations for Display Work Places in the Office Sector). EPA E Compliance...
0.75mm² or 18AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact your Compaq authorized service provider.