Trim Pieces Installation - Absen NX Series User Manual

3.4 Trim pieces installation

This product supports trim pieces installation, and the trim pieces and the
cabinet are locked and fixed by external hexagonal combination machine screw
HM3*8.
3.4.1 The specification of the trim pieces name is as follows:
Trim pieces name
Upper and lower long trim pieces
(with chamfer)
Upper and lower standard trim
pieces
Left and right long trim pieces
(with chamfer)
Left and right standard single
trim pieces
Left and right standard double
trim pieces
Upper and lower single-length
trim pieces (with chamfer), small
cabinet use
Upper and lower single trim
pieces, small cabinet use
Upper and lower double trim
pieces, small cabinet use
Required screws
3.4.2 Principles of the Trim pieces scheme:
1. The position of the upper left corner of the screen: the upper side is longer,
the left side is shorter;
2. The lower left corner position of the screen: the left side is longer and the
lower side is shorter;
3. The lower right corner position of the screen: the lower side is longer and
the right side is shorter;
4. The upper right corner position of the screen: the right side is longer and
38
Trim pieces length
960mm+trim pieces
thickness
960mm
540mm+trim pieces
thickness
540mm
1080mm
240mm+trim pieces
thickness
240mm
480mm
External hexagon machine screw HM3*8 SUS304
NX Series Product User Manual
Remark
Top left & bottom right
fixed position
——
Bottom left & top right
fixed position
——
——
Top left & bottom right
fixed position
——
——