3、Product Installation - Absen CR Series User Manual

Leading LED Applications
3. Product Installation
This CR series products are suitable for fixed installation on steel frame, like the figure shows below.
Suggested Installation Procedure:
Installing the first two lines of cabinets at the bottom of the steel frame, then install cabinets layer by layer to top.
You need to use cabinet connector plates, structure connectors and screws-M8 to mount the panels on to the
frames.
Notes: You need to keep the space of 42mm between steel frame and cabinets connectors, in case there is no
space for reaching module fixing screws, which brings trouble to dismounting of cabinets and modules.
Cabinetconnector 40x40mmstructure
CR SeriesUserManual
- 11 -