Unigas RG91 Manual page 78

12 BURNER MANUAL OPERATION
The operator can decide if choosing burner manual operation at a settable fixed load or modulating operation through the automatic load controller, then
can also set the burner shutdown by means of the "burner off" function.
Choose the type of operation (Au-tom / Manual / Off).
1st level 2nd level
ManualOpe- ration
Au-tom/
Manual/Off
Setting the load percentage for the manual operation
To set the load percentage at which the burner must operate in manual mode, proceed as described below.
1st level 2nd level
ManualOpe- ration
SetLoad
3rd level Password
Automatic/ Burner
on / Burner off
User
3rd level Password
0..100% User
Description
Menu level for activating manual operation with the preselected load
Selection of manual or automatic operation
Description
Menu level for activating manual operation with the preselected load
Set target load
38