Unigas RG91 Manual page 17

BURNERS WITH INVERTER VARIANT (if provided)
KOSTAL
The LMV51.300 / LMV52.xxx, HAGC31-CU01 e LMV37.400/LMV26.300 electronic cam burners with fan motor driven by inverter in
addition to the air and fuel adjustment curves also have a fan motor speed adjustment curve.
The LMV5x, HAGC31-CU01 equipment through a sensor controls the fan motor revolutions and with a signal in 4÷20mA controls it
through the inverter.The LMV2x equipment through a sensor controls the fan motor revolutions and with a signal in 0÷10V controls it
through the inverter.
Generally the curve of the inverter goes from 50% to 100% of the engine revolutions. This, in addition to improving the setting of the
burner also allows a saving on the consumption of the fan engine.
INVEOR M
Terminal interface with Inverter
LMV5 - HAGC31-CU01
A B
INVEOR
Mx-xxxx-xxxx - LP02/LP04-...
Tipo
XXXXX
XXXXX
LMV5
XXXXX
XXXXX
XXXXX
LMV2x/3x
XXXXX
C
LMV2x/3x
17
PART II: INSTALLATION
Modello
M-. MD. xx. xx. x. x. xxx. EI.
M-. MD. xx. xx. x. x. xxx. EG.
MG. MD. xx. xx. x. x. xxx. EK.
MG. MD. xx. xx. x. x. xxx. ER.
M-. MD. xx. xx. x. x. xxx. EB.
MG. MD. xx. xx. x. x. xxx. EC.
D
Braking resistances
Connection to brake
resistors when provi-
ded