• [Sheet Width] setting
a. Tap
b. Enter the sheet width and tap [OK].
• [Sheet Right Edge] setting
a. Tap [Change] next to [Sheet Right Edge].
b. Tap
media, and then tap [OK].
• [Side Margin] setting
a. Tap [Side Margin] to set the margin.
You can select 5 mm (0.2 in.), 10 mm (0.39 in.), or 25 mm (0.98 in.).
b. Tap [OK].
8.
On the [Setup Method] screen, select [Do Not Use Take-up Unit]/[Use Take-up Unit] and tap [Start Setup].
next to [Sheet Width].
or
to move the carriage's base point mark to the right edge of the
Setup of New Media
41
Basic Operations