Ryobi R80XZTR30 Manual page 29

LEVELLING THE CUTTING DECK
1. Stop the product on a level surface.
2. Unhook the latch from the stud on the
housing. Uninstall the mulch cover.
3. Position the blades so that the ends point
toward the sides of the mower.
4. On the outside edge of each blade,
measure the distance from the bottom
edge of the side of the blade to the
ground.
NOTE: If the distance between the two sides
is greater than 3.1 mm (1/8 in.) , a side-to-
side adjustment is necessary.
1
2
1
3
4
1
< 3.1 mm
p.21
2
2
> 3.1 mm
29
Maintenance