Ryobi R80XZTR30 Manual page 16

14
2
1
Open the battery covers located on
each side of the mower. Raise the
battery pack from the port.
20
Set the cutting deck to the preferred
cutting height.
NOTE: When using the ride-on mower
for the first time, it is recommended to
mow the lawn at a higher cutting height
on the first pass and then gradually
lowering the cutting height by single
steps until the preferred lawn height is
achieved.
16
Getting started
15
Remove the foam ring from the bottom
of the port.
21
1
2
Insert the start key, and turn the key
to the ON position. Pull up the blade
engage knob to activate the blades.
16
1
2
Install the battery pack to the port.
Close the battery covers.
22
1
3
2
Step on the brake pedal to disengage
the parking brake.
NOTE: To engage the parking brake,
step on the brake pedal, and then the
parking brake pedal.