Table of Contents
Advertisement
1
Wear full eye protection, non-slip
heavy-duty
gloves,
substantial
footwear, and long trousers at all times
while operating the product. Do not
operate the product when barefoot or
wearing open sandals.
NOTE: Make sure that the carabiner
clips are securely attached to the
bottom of the seat.
10
1
3
Lift up the seat adjustment lever. While holding the lever, slide the seat forwards.
Release the lever, and make sure that the seat is locked in position before
operating the mower.
14
Getting started
2
Insert the joystick through the dust
cover. Align the holes on the joystick
with the holes on the mounting shaft.
6
1
3
2
Attach the seat hinge bracket onto the
seat pivot bushing. Push back the seat
to an upright position.
2
3
1
Insert the hex screws and tighten
securely with a hex key. Align the tabs
on the dust cover with the base and
press down to lock the dust cover into
place.
WARNING: Make sure that the seat
pivot bushing is pushed back towards
the round side of the seat hinge bracket
so that the seat is secured.
11
Press the center edge on the battery
bucket cover to release the latch.
3
2
Advertisement
Table of Contents
