Nortel SRG200 Configuration Manual page 67

Figure 5
Routing Entries window with no endpoint selected
4 Choose the appropriate Service Domain, L1 Domain, and L0 Domain
from the corresponding drop-down menus.
5 Click on Look up to open a window with a lookup path for gateway
endpoints.
6 Click Search to display a list of gateway endpoints (see Figure 6), and
click on the endpoint at the branch office.
The Routing Entries window then displays a list of routing entries
corresponding to that endpoint, if any. See Figure 7 on
Figure 6
Lookup path for gateway endpoints
Main Office Configuration for SRG200/400 Release 1.5
Dialing Plan configuration Page 67 of 254
page 68.
Configuration Guide