Nortel SRG200 Configuration Manual page 140

Page 140 of 254
LD 117 — Configure Adaptive Network Bandwidth Management. (Part 4 of 5)
Command Description
Change the QoS Unacceptable Alarm Threshold value for the identified zone,
where:
• Zone = 1-255
• Thres = threshold value = 1-(75)-99
When the zone-to-zone QoS value drops below the threshold value, the alarm
is presented. When the zone-to-zone QoS value is greater than this threshold
value, this alarm is presented as being deactivated. This value must be below
the value of ZQWAT.
CHG ZQWAT <Zone> <Thres>
Change the QoS Warning Alarm Threshold value for the identified zone,
where:
• Zone = 1-255
• Thres = threshold value = 1-(85)-99
When the zone-to-zone QoS value drops below the threshold value, the alarm
is presented. When the zone-to-zone QoS value is greater than this threshold
value, this alarm is presented as being deactivated. The value for ZQWAT
must be higher than the value of ZQUAT.
NN43001-308 Standard 01.02
Bandwidth Management
May 2007