Management Ip Address Allocation - Paradyne 8540 Network Configuration Manual

Hotwire dslam for 8540 and 8546 dsl cards
Hide thumbs Also See for 8540:
Table of Contents

Advertisement

Management IP Address Allocation

8000-A2-GB21-20
The primary functionality of the management domain is monitoring and
configuring the network. To provide this capability, IP addresses must be
allocated for the components that are monitored and configured by an NMS and
MCC card.
Component
MCC Card
DSL Card
HotWire 5446 RTU
NOTE:
Management functions of RTUs associated with an 8540 DSL card are
performed by an internal agent on the 8540 DSL card.
To configure the MCC card, the DSL card management IP addresses, and the
HotWire 5446 RTU management IP addresses, use the HotWire DSLAM user
interface. For step-by-step instructions, see Chapter 4, Configuring the HotWire
DSLAM , of the HotWire DSLAM for 8540 and 8546 DSL Cards User's Guide .
November 1997
IP Address Requirement
The MCC card must have two IP addresses:
One IP address for connectivity to the NMS or Router
(connecting to the NMS). This address is also known as
the Router ID.
One IP address to communicate to the DSL cards (over
the s1b system backplane interface) in the HotWire
DSLAM chassis.
These two IP addresses must be on separate
subnetworks of the NMS domain. That is, they can be on:
Completely separate networks (e.g., 135.1.0.0/16 and
143.1.0.0/24).
Completely separate subnets (e.g., 135.1.1.0/24 and
135.1.2.0/24), or
Subnets of the management domain (e.g., 135.1.0.0/16
and 135.1.2.0/24).
Each DSL card must have one management IP address in
the same subnetwork as the MCC card's system
backplane IP address.
NOTE:
The backplane subnet cannot be set to the
same e1a subnet on that DSL card.
Each 5446 RTU must have one management IP address
in the same subnetwork as the MCC card's system
backplane IP address.
NOTE:
Since there could be four HotWire 5446 RTUs
per DSL card and 18 DSL cards per HotWire
DSLAM, a maximally-configured system
would have 72 HotWire 5446 RTU
management IP addresses. These must be in
the same subnetwork as the MCC card's
system backplane interface and the 18 DSL
cards' management IP addresses (total of 91
addresses).
IP Address Allocation
5-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

8546Hotwire dslamж

Table of Contents