5171 Remote Pc Nic - Paradyne 8540 Network Configuration Manual

5171 Remote PC NIC

8000-A2-GB21-20
The following illustration shows the HotWire 5170 RTU with its 10BaseT interface
connected to multiple end-user systems (typically a PC with a LAN card).
POTS/DSL
NID
From Network
Access Provider
NID = Network Interface Device
For more information about the HotWire 5170 RTU, see the HotWire
5170 Remote Termination Unit User's Guide .
The HotWire 5171 PC Network Interface Card (NIC) is a 16-bit ISA, add-on card
with a 6-pin telephone modular jack connector used for the DSL network
connection. The 5171 PC NIC edge connector plugs into a 16-bit expansion slot
in an IBM-compatible 80486 (or higher) system board and conforms to ISA bus
standards.
The following illustration shows a PC with an internal HotWire 5171 PC NIC.
POTS/DSL
NID
From Network
Access Provider
NID = Network Interface Device
For more information about the HotWire 5171 Remote PC NIC, see the HotWire
5171 Remote PC Network Interface Card User's Guide .
November 1997
Introduction to the HotWire DSLAM
Optional
POTS
POTS
POTS
Splitter
5170
DSL RTU
Optional
POTS
POTS
POTS
Splitter
DSL
End-user
System 1
End-user
System 2
10BaseT
HUB
.
.
.
End-user
System 32
97-15455c
PC with Internal
HotWire 5171
PC NIC
97-15713
1-7