Network Configuration Worksheets
TASK 7: (When Using an 8546 DSL Card) Configure the HotWire 5446
RTU Management Domain IP Addresses
A-12
On the IP Network screen, configure the HotWire 5446 RTU IP addresses on
each 8546 DSL card, which are the RTU's management domain IP addresses.
Access the . . .
IP Network screen
IP Network Screen
Prompt
For DSL port 1 (s1c):
1. Enter the interface name at the Input
Interface Name: prompt.
2. Enter the port 1 RTU's IP address at
the (nnn.nnn.nnn.nnn)or
address-pool: prompt.
3. Enter route type HOST at the Route
to peer (host/net): prompt.
November 1997
By . . .
Selecting Configuration
Interfaces
from the HotWire – DSL menu.
Your Configuration Setting
IP Interface = s1c
Peer IP Address =
Route to Peer= HOST
IP Network
A-C-B
8000-A2-GB21-20