SNMP Configuration Worksheets
SNMP Agent Configuration Worksheets
Defining a Community and Enabling Traps
C-2
The following sections provide worksheets for configuring the SNMP agent. Use
these worksheets when preparing SNMP configuration on both the MCC and DSL
cards.
On the SNMP Communities/Traps screen, define a community by specifying the
SNMP NMS manager who will receive traps. Up to three managers can be
assigned for each community. Also, on this screen, you can enable or disable the
generation of traps.
Access the . . .
SNMP Communities/Traps screen
NOTE:
The following screen is the SNMP Communities/Traps screen from the
HotWire – MCC menu. The SNMP Communities/Traps screen from the
HotWire – DSL menu is not shown. However, it displays the same fields and
prompts.
November 1997
By . . .
Selecting
Configuration
SNMP
Communities/Traps
(A-F-D) from the HotWire – MCC menu if
configuring the MCC card.
Selecting
Configuration
SNMP Communities/Traps
(A-F-C) from the HotWire – DSL menu if
configuring a DSL card.
8000-A2-GB21-20