Chapter 1
Application Gateway Overview
Connectors
Rear Connectors and Ports
Figure 2
Connectors on the back of the Application Gateway
not used
Universal AC
power cord
connector
4
Application Gateway Hardware Installation Guide
Figure 2
shows the cable connectors on the back of the Application
Gateway.
not used
not used
The AC power cord connector is at the back of the Application
•
Gateway on the left side.
The P2 network interface (Interface 1) connects the Application
•
Gateway to the server-side network, directly or indirectly.
The P1 network interface (Interface 0) connects the Application
•
Gateway to the client-side network.
The serial port connects the Application Gateway to a computer
•
capable of running terminal emulation software.
The remaining ports are not used for any function. Do not plug any
•
device into these ports.
P2 (Interface 1)
P1
Serial port
(Interface 0)
interface)
553-AAA0104