Heidolph Intelligent Hei-VAC Control Operating Instructions Manual page 72

Commissioning
➜
Attach the support rod to the evaporator and attach the controller to the top end of the
support rod, so that the support rod locks into the gap on the back of the controller.
➜
Connect the power supply to the controller [1].
➜
Connect the cable of the vacuum valve to the controller [2].
➜
Attach the hoses:
–
From the upper connector of the vacuum valve to the top of the condensate cooler [3].
– From the lower connector of the vacuum valve to the vacuum source [4].
– From the connector for measuring and venting of the controller to the second
connector at the top of the condensate cooler [5].
2
1
5
3
4
70