Table of Contents
Advertisement
If you pull a new device into a room via drag and drop, a pop-up window opens in which all
devices that are located in the system are listed and which have not been allocated to a room.
The devices are suitable respectively for the selected application.
Fig. 20:
Pop-up window with the suitable devices
Identification
The device can be identified via the serial number or via switching.
Identification via serial number
Fig. 21:
Identification via serial number
Compare the serial number and the short ID of the identification label, which is glued on the
■
device plan, with the numbers and IDs in the list. This is how the searched for device and
possibly the searched for channel are identified.
Product manual 2CKA001373B8563
Commissioning
│27
Advertisement
Table of Contents
