5.3
Installation site
When selecting the installation location, ensure that there is a distance to sources of heat or
cold.
Heat or cold sources influence the function of the internal temperature sensor.
Fig. 6: Installation sites
The device should be mounted on a wall opposite the heat source. The distance to side walls or
door frames should be at least 50 cm. The distance to the floor should be about 150 cm.
Do not mount the device on the wall. Low outside temperatures have an effect on
■
temperature regulation.
The room temperature controller must not come into direct contact with liquids.
■
Do not mount the device in direct sunlight, near radiators, windows, light sources or behind
■
curtains.
Product manual 2CKA001373B8563
Connection and installation
│17