Table of Contents
Advertisement
1.2.5.
General safety rules
The removal and/or handling of any safety device is strictly prohibited.
Children and unaccompanied disabled people are not allowed to use the device.
It is forbidden to touch the device barefoot and with wet or wet parts of the body.
Any cleaning operation is prohibited when the main switch is in position « ON
It is forbidden to pull, unplug or twist the electrical cables coming out of the device, even if it is
disconnected from the power supply.
It is forbidden to stand on the device, to sit on it and/or to put objects of any kind on
It is forbidden to splash the device or project water on it.
It is forbidden to disperse, deposit or leave within the reach of children the packaging material
(cardboard, staples, plastic bags ... etc.) because it can be a potential source of
Any ordinary or extraordinary maintenance operation must be carried out at a standstill, without
power supply.
Do not put your hands or introduce screwdrivers, wrenches or other tools into moving parts.
The machine manager and the maintenance technician must receive the appropriate training
and instruction for their tasks in safe conditions.
Operators should be familiar with personal protective equipment and accident prevention rules
prescribed by national and international laws and standards.
1.2.6.
Worker safety
It is forbidden to handle or replace parts of the machine without the express permission of the
manufacturer. These interventions release the manufacturer from any civil or criminal
The use of components, consumables or spare parts other than those recommended by the
manufacturer and/or mentioned in this manual may constitute a danger to operators and/or
damage the machine.
The operator's workstation must be kept clean, tidy and free of objects which may restrict his
freedom of movement. The workstation must be sufficiently illuminated for the performance of
the planned operations. Insufficient or excessive lighting can present risks.
Ensure the appropriate ventilation of the work zone is always guaranteed. Ensure the air suction
systems are operating correctly, in optimal conditions, and comply with the legal measures..
During the design phase, the indications contained in UNI EN ISO 14738 were followed with
regard to workstations on machines and the lifting limits imposed by UNI ISO 11228-1 were
evaluated.
12 / 74
Before starting any operation on the units, each operator must be fully familiar with
the operation of the machine and its controls and have read and understood all the
information contained in this manual.
Anywhere the unit is installed, the applicable local laws regarding worker safety and
health must be accurately respected and enforced by each employer. We therefore
recall that:
».
it.
danger.
liability..
00U07352250-A_EN
Advertisement
Table of Contents
