SUN2000-4.95KTL-JPL0
User Manual
8.1 Removing a Solar Inverter
Procedure
Step 1 Power off the system.
Step 2 Disconnect all cables from the solar inverter, including the signal cable, DC input
power cables, AC output power cable, and PE cable.
Step 3 Remove the solar inverter from the mounting bracket.
Step 4 Remove the mounting bracket.
----End
8.2 Packing a Solar Inverter
●
●
8.3 Disposing of a Solar Inverter
If the solar inverter service life expires, dispose of it according to the local disposal
rules for electrical equipment and electronic component waste.
Issue 04 (2023-02-17)
8
If the original packaging is available, put the solar inverter inside it and then
seal it using adhesive tape.
If the original packaging is unavailable, put the solar inverter inside a suitable
hard carton and seal it properly.
Copyright © Huawei Technologies Co., Ltd.
Handling a Solar Inverter
8 Handling a Solar Inverter
60