SUN2000-4.95KTL-JPL0
User Manual
C
You can restore the solar inverter parameters to factory defaults by changing the
grid code. The following parameters are exceptions and need to be manually set.
Table C-1 Parameters that cannot be restored to factory defaults by changing the
grid code
Category
Feature
parameters
Power
Adjustment
RS485
communicatio
ns
Issue 04 (2023-02-17)
Restoring the Factory Defaults of a
Parameter
MPPT multi-peak scanning
MPPT multi-peak scan
interval (min)
Upgrade delay
Communication interruption
duration (min)
Schedule instruction valid
duration (s)
Maximum active power (kW)
Fixed active power derated
(W)
Active power percentage
derating (%)
Reactive power change
gradient (%/s)
Baud rate
Copyright © Huawei Technologies Co., Ltd.
C Restoring the Factory Defaults of a Solar Inverter
Solar Inverter
Remarks
Log in to the SmartLogger
WebUI as Advanced User or
admin and choose
Monitoring > Running
Param. > Feature
parameters to set the
parameters.
Log in to the SmartLogger
WebUI as Special User or
admin and choose
Monitoring > Running
Param. > Power Adjustment
to set the parameters.
The preset value is 9600 bps
(cannot be restored or
changed).
67