Huawei SUN2000-4.95KTL-JPL0 User Manual page 48

SUN2000-4.95KTL-JPL0
User Manual
Context
Figure 5-9 DC input terminals
(1) Terminals of DC input 1
Procedure
Step 1 Assemble positive and negative connectors.
Use the positive and negative metal terminals and DC connectors supplied with
the solar inverter. Using incompatible positive and negative metal terminals and
DC connectors may result in serious consequences. The caused device damage is
not covered under any warranty or service agreement.
● Cables with high rigidity, such as armored cables, are not recommended as DC
● Before assembling DC input connectors, label the cable polarities correctly to
● After crimping the positive and negative metal terminals, pull the DC input
● Insert the crimped metal terminals of the positive and negative power cables
Issue 04 (2023-02-17)
CA UTION
NO TICE
input power cables, because poor contact may be caused by the bending of the
cables.
ensure correct cable connections.
power cables back to ensure that they are connected securely.
into the appropriate positive and negative connectors. Then pull back the DC
input power cables to ensure that they are connected securely.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(2) Terminals of DC input 2
42