Rack Mounting; Installing The Server In A Rack - TYAN TS75-B7122 Service Engineer's Manual

2.2

Rack Mounting

After installing the necessary components, the TYAN TS75-B7122 chassis can
be mounted in a rack using the supplied rack mounting kit.
NOTE：In order to support the full extended rail, the system Max loading must
not exceed 32KG.
Sliding Rail Kit
 Sliding Rails x 2
Rail screw Pack x 2

2.2.1

Installing the Server in a Rack

Follow these instructions to mount the TYAN TS75-B7122 into an industry
standard 19" rack.
NOTE: Before mounting the TYAN TS75-B7122 chassis in a rack, ensure that all
internal components have been installed and that the unit has been fully tested.
However, to make the installation easier, we suggest that you remove all HDD
trays before you insert the chassis into the rack.
Remove the Inner Rail
1. Pull tab forward and take out inner rail.
54
http://www.tyan.com