TYAN TS75-B7122 Service Engineer's Manual page 173

Configure sSATA as
Identify the sSATA port is connected to Solid State Drive or Hard Disk Drive.
AHCI / RAID
Support Aggressive Link Power Management
Enables/Disables SALP.
Disabled / Enabled
Port 0/1/2/3/4/5
Enable or Disable sSATA Port.
Disabled / Enabled
Hot Plug
Designates this port as Hot Pluggable.
Disabled / Enabled
Configure as eSATA
Configures port as External SATA (eSATA).
Disabled / Enabled
Spin Up Device
If enabled for any of ports Staggered Spin Up will be performed and only the drives
witch have this option enabled will spin up at boot. Otherwise all drives spin up at
boot.
Disabled / Enabled
sSATA Device Type
Identify the SATA port is connected to Solid State Drive or Hard disk Drive.
Hard Disk Drive / Solid State Drive
sSATA Topology
Identify the Secondary SATA Topology if it is Default or ISATA or Flex or
DirectConnect or M2.
Unknown / ISATA / Direct Connect / Flex / M2
173
http://www.tyan.com