Table of Contents
Advertisement
5.3.15.4
ADR Configuration
Enable/Disable ADR
Enable or disable Automatic DIMM Refresh (ADR). This is not available if eADR is
enabled since eADR requires ADR to be enabled.
Platform-POR / Enabled / Disabled
ADR GPIO
Select between GPIO_B or GPIO_C.
GPIO_B / GPIO_C
Host Partition Reset ADR Enable
Enables/Disables ADR on Host Partition Reset.
Platform-POR / Enabled / Disabled
Enable/Disable ADR Timer
Held-off for DEBUG PURPOSES ONLY!.
Platform-POR / Enabled / Held-off
ADR timer expire time
Select proper ADR timer value: 25uS, 50uS, 100uS or 0.
Platform-POR / 25 uS / 50 uS / 100 uS / 0 us
179
http://www.tyan.com
Advertisement
Table of Contents
