Table of Contents
Advertisement
The timeout value in milliseconds. The minimum value is 100 milliseconds and the
maximum is 20 seconds.
Configure ISID
OUI-format ISID in 6 bytes, default value is derived from MAC address. Only last 3
bytes are configurable. Example: update 0ABBCCDDEEFF to OABBCCF07901 by
input F07901.
Enable DHCP
Enable DHCP.
Disabled / Enabled
Initiator IP Address
Enter IP address in dotted-decimal notation.
Initiator Subnet Mask
Enter IP address in dotted-decimal notation.
Gateway
Enter IP address in dotted-decimal notation.
Target Name
The worldwide unique name of the target. Only iqn. format is accepted.
iqu. xxx
Target IP Address
Enter IP address in dotted-decimal notation.
Target Port
Target Port.
Boot LUN
Hexadecimal representation of the LU number. Examples are:
4752-3A4F-6b7e-3F99, 6734-9-156f-127, 4186-9.
Authentication Type
Authentication method: CHAP, Kerberos, or None.
CHAP / None
Save Changes
Must reboot system manually for changes to take place.
Back to Previous Page
Back to Previous Page.
201
http://www.tyan.com
Advertisement
Table of Contents
