TYAN TS75-B7122 Service Engineer's Manual page 182

Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. 'AUTO' uses default value: for a Root port it is 100 ms, for a Hub port the
delay is taken from Hub descriptor.
Auto / Manual
NOTE: Device power up delay in seconds is available when Device power-up
delay is set to [Manual].
AMI Virtual CDROM0/1/2/3 1.00
Mass storage device emulation type. 'AUTO' enumerates devices according to their
media format. Optical drives are emulated as 'CDROM', drives with no media will be
emulated according to a drive type.
Auto / Floppy / Forced FDD / Hard Disk / CD-ROM
AMI Virtual HDisk0/1/2/3 1.00
Mass storage device emulation type. 'Auto' enumerates devices according to their
media format. Optical drives are emulated as 'CDROM', drives with no media will be
emulated according to a drive type.
Auto / Floppy / Forced FDD / Hard Disk / CD-ROM
182
http://www.tyan.com