Configuring Voip Trunk Media Parameters - Nortel BCM200 Integration Manual

Configuring VoIP trunk media parameters
Perform the following procedure to configure VoIP trunk media parameters.
Configuring VoIP trunk media parameters
Step
1
2
3
4
5
6
Solution Integration Guide for Multisite Business Communications Manager Systems
Copyright © 2007, Nortel Networks
.
Action
Log on to Element Manager.
In the Task Navigation Panel, select the Configuration tab.
Select Resources > Telephony Resources.
See Figure 2 "Telephony Resources" (page
Figure 2
Telephony Resources
In the Modules panel, select the line where the Actual Type column
is set to IP Trunks.
Select the H.323 Media Parameters or SIP Media Parameters tab.
Enter the information that supports your system.
Enterprise: Common
NN49000-303 01.01 Standard
Release 4.0, 3.7 29 June 2007
Configuring VoIP trunk media parameters 19
—End—
19).