Nortel 7430 Deployment Manual page 5

Use
When using your telephone equipment, basic safety precautions should always be
followed to reduce risk of fire, electric shock and injury to persons, including the following:
1 Read and understand all instructions.
2 Follow the instructions marked on the product.
3 Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or
aerosol cleaners. Use a damp cloth for cleaning.
4 Do not use this product near water, for example, near a bath tub, wash bowl, kitchen
sink, or laundry tub, in a wet basement, or near a swimming pool.
5 Do not place this product on an unstable cart, stand or table. The product may fall,
causing serious damage to the product.
6 This product should never be placed near or over a radiator or heat register. This
product should not be placed in a built-in installation unless proper ventilation is
provided.
7 Do not allow anything to rest on the power cord. Do not locate this product where the
cord will be abused by persons walking on it.
8 Do not overload wall outlets and extension cords as this can result in the risk of fire or
electric shock.
9 Never spill liquid of any kind on the product.
10 To reduce the risk of electric shock do not disassemble this product, but have it sent to
a qualified service person when some service or repair work is required.
11 Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a When the power supply cord or plug is damaged or frayed.
b If the product has been exposed to rain, water or liquid has been spilled on the
product, disconnect and allow the product to dry out to see if it still operates; but do
not open up the product.
c If the product housing has been damaged.
d If the product exhibits a distinct change in performance.
12 Avoid using a telephone during an electrical storm. There may be a remote risk of
electric shock from lightning.
13 Do not use the telephone to report a gas leak in the vicinity of the leak.
14 Caution: To eliminate the possibility of accidental damage to cords, plugs, jacks, and
the telephone, do not use sharp instruments during the assembly procedures.
15 Save these instructions.
Digital Mobility Deployment Guide
5