Advertisement
Chapter 1. Introduction
▪ Control Panel and Keys
Electrocardiograph is designed so that the operator is able to control it through some keys and a
touch LCD screen.
1-On/Off :
Press to turn on or off the device.
2-Sens:
Use to adjust the amplitude of ECG waveform on the screen and recording paper.
3- Copy :
Press to re-print previous record .
4-Speed :
Use to adjust the recording speed.
5-Calib :
Press to record a 1mV calibration signal
6-◄Lead :
Press to select previous lead (s).
7-Lead► :
Press to select next lead (s).
8-Start/Stop :
Press to record ECG signals. Press again to stop the recording.
9- Reset :
Press to reset filters and bring signals back to the main screen.
10-Mode:
Press to select recording mode.
Right Arrow :
11
-
Press to move cursor to the right in some menus.
Down Arrow :
12
-
Press to move cursor to the down in some menus
Up Arrow :
13
-
Press to move cursor to the up in some menus
14- Enter:
Press to enter software menus or select menus options.
Left Arrow :
15
-
Press to move cursor to the left in some menus
16- Menu/Home:
Press to access Main Menu or return to main page.
4
Service Manual – Dena 350
Advertisement
