EASTMAN Kodak X-Omat 5000 RA Operator's Manual page 48

OPERATORS MANUAL
[7] One of the following 2 screens will appear. Press the key for the desired film processing cycle.
PRESS BUTTON TO SELECT
PRESS BUTTON TO SELECT
[8] Press the "SPEED" key.
[9] Press the appropriate key to change the transport speed:
• [ ] key to increase the speed
• [ ] key to decrease the speed
• [DEFAULT SETTING] to return to the default speed
• [CANCEL REQUEST] to cancel the procedure
45 IN/MIN = SPEED SETPOINT
[10] Press the "DONE/RETURN" key repeatedly until you return to the display shown below. Then press the "YES"
key to return to the Walk-Up Menu.
EXIT SETUP?
48
RAPID STD CYCLE
CYCLE
K/RA
CYCLE
TEMP REPLEN
VOLUME
YES
EXTD
CYCLE
SPEED
DEFAULTS CANCEL
ETTING REQUEST
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
DONE/
RETURN
CANCEL
REQUEST
May 1997 – 5B6729