Table of Contents
Advertisement
IP
The following IP issue exists in the Passport 1000 Series switch software release
2.0.7.8:
The Passport switch does not use a dynamically learned route (RIP/OSPF) when a
static route for that network becomes inactive.
(Q00055362/115167-1, 121564-1)
Related publications
Refer to the following Passport documentation for additional information:
•
Reference for the Passport 1000 Series Management Software Switching
Operations (part number 208964-A)
This publication describes how to use Device Manager to configure and
manage layer 2 (switching) functions in a Passport switch.
•
Reference for the Passport 1000 Series Management Software Routing
Operations (part number 208965-A)
This document describes how to use Device Manager to configure and
manage layer 3 (routing) functions in a Passport switch.
•
Various addenda to the release notes for software release 2.0 for Passport (and
Accelar) 1000 Series products (part numbers 206494-A through 206494-Z)
•
Release Notes for the Accelar 1000 Series Products Software Release 2.0
(part number 896-00181-E)
•
Networking Concepts for the Passport 1000 Series Routing Switch (part
number 205588-B)
•
Reference for the Accelar 1000 Series Command Line Interface Software
Release 2.0 (part number 202086-B)
•
Installing the Accelar 1000 Series Chassis (part number 893-01051-D)
•
Using the Accelar 1050/1051 Routing Switch (part number 201603-C)
•
Using the Accelar 1100/1150 Routing Switch (part number 893-01050-C)
•
Using the Accelar 1200/1250 Routing Switch (part number 893-01049-C)
•
Upgrading to Accelar 2.0 Software (part number 206077-A)
Release Notes for the Passport 1000 Series Software Release 2.0.7.8
Related publications
19
Advertisement
Table of Contents
