Table of Contents
Advertisement
Button Descriptions
Boost Button
Use the boost button
to enhance the image lighting. The figure
below, on left, shows an image without boost; the figure on right
shows the same image with boost.
The red LED on the button will glow when the boost function is en-
abled. For best results, hold the probe very steady when using this
feature.
Rotation Button
Use the rotation button
to rotate the image 90° up to four times,
as shown in the figure below.
Particle Filter Button
Press the filter button
to enhance the image, removing the effects
of dust particles. The image on left, below, shows an image with no
filtering; the image on right shows the same image with filtering.
2
#NAS100124; r. AB/87921/87926; en-US
Advertisement
Table of Contents
Need help?
Do you have a question about the HDV7C-55-3 and is the answer not in the manual?
Questions and answers