Uplift Desk Flex Chair Dolly ACC074 Instructions

Flex Chair Dolly
ACC074
Package Contents
Base
Package Contents Package Contents
Package Contents Package Contents
Base
M6 x 12mm
Hexagon
Base
Base
Base Handle
Socket Screw x 4
Base Base Handle Handle
Lock Washer x 4
M6 x 12mm M6 x 12mm Lock Washer x 4
Hexagon Hexagon
M6 x 12mm M6 x 12mm Lock Washer x 4 Lock Washer x 4 Washer x 4
Socket Screw x 4
Hexagon Hexagon Socket Screw x 4
Socket Screw x 4 Socket Screw x 4
1
Handle
Handle Front Caster x 2
M6 x 12mm
Lock Washer x 4
Hexagon
Handle Front Caster x 2 Rear Caster x 2
Handle Front Caster x 2
Rear Caster
Front Caster x 2 Front Caster x 2 Rear Caster x 2 Rear Caster x 2
Socket Screw x 4
qty 2
Washer x 4
Lock Washer x 4 Washer x 4 Washer x 4 M8 x 14mm M8 x 14mm M8 Nut x 4
Hex Head Hex Head
Washer x 4 M8 x 14mm M8 x 14mm M8 Nut x 4 M8 Nut x 4
Screw x 4
Hex Head Hex Head Screw x 4
Screw x 4 Screw x 4
Base
Base
Front Caster x 2
M6 x 12mm
M6 x 12mm
Rear Caster x 2
Hexagon
Hexagon
Socket Screw x 4
Socket Screw x 4
Lock Washer x 4
Washer x 4 M8 x 14mm
Hex Head
Rear Caster x 2
Front Caster
Screw x 4
qty 2
M8 x 14mm M8 Nut x 4
Hex Head
M8 Nut x 4

Step 1 - Front Caster Attachment

Screw x 4
A. Align the holes in the mounting plates of the Front Casters with
the holes in the Base as shown.
B. Insert an M8 x 16mm Hex Head Screw into each of the holes.
C. Once all eight screws have been started, tighten them
completely using a 13mm (½") flat wrench, socket, or adjustable
wrench.

Step 2 - Rear Caster Attachment

A. Remove the M12 Nuts from the threaded stems of the Rear
Casters if they are not provided in a separate hardware bag.
B. Insert the threaded stem of the Rear Casters through the holes
at the front of the Base as shown.
C. Thread the M12 Nuts onto the threaded stems of the Rear
Casters and tighten them using two 19mm (3/4") flat wrenches
or adjustable wrenches
Base
Handle
Handle
M6 x 16mm Low Profile
Rear Caster x 2
Socket Head Screw
qty 4
Lock Washer x 4
Lock Washer x 4
M8 x 16mm Hex
Head Screw
qty 8
Washer x 4
M8 Nut x 4
M12 Nut
qty 2
(May be installed on Rear Casters)
Handle Fro
Front Caster x 2
Front Caster x 2
M6 Split Washer
qty 4
Washer x 4
Washer x 4 M8 x 14mm
M6 Flat Washer
Hex Head
qty 4
Screw x 4
M8 x 14mm
Hex Head
Screw x 4
R