Uplift Desk ACC089 Quick Start Manual

Blade Chair Casters
SKU: ACC089
Package Contents
Blade Chair Casters (5)
Blade Chair Casters are designed to be used on hard, smooth surfaces such as hardwood, laminate, tile,
chair mats, etc.
If you have purchased the Blade Chair Casters with your chair, please follow the caster installation steps
on the instructions received with your chair, using the Blade Chair Casters instead of the casters that
came with the chair. If you have purchased the Blade Chair Casters to replace the original casters already
installed on an assembled chair, please proceed to the following assembly steps.
© UPLIFT Desk • 800-349-3839 • info@upliftdesk.com • upliftdesk.com
STEP 1
Carefully tip your chair so that it is laying with
either it s back or side resting on the floor providing
access to the casters.
STEP 2
A. Grip one of the casters tightly in one hand while
holding the chair base with the other hand. It
is easiest to start with the caster that is in the
highest position and furthest away from the
floor.
AI-ACC089-1.0