Table of Contents
Advertisement
4/24
CHC Controller | About this documentation
Bosch Rexroth AG, RE 18324-41/2022-11-29
1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following products:
• CH controller CHC 12-1/20
This documentation is intended for machine/system manufacturers,
assemblers and service engineers.
This documentation contains important information on the safe and proper
transport, installation, commissioning, operation, maintenance, disassembly and
simple troubleshooting of the product.
▶ Read this documentation completely, in particular chapter 2 "Safety instructions"
and chapter 3 "General instructions on property damage and product damage"
before you start working with the product.
1.2 Required and supplementary documentation
▶ Only commission the product if the documentation marked with the
book symbol
is available to you and you have understood and observed it.
Table 1: Required and supplementary documentation
Title
CHC 12-1/20 controller
1.3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used throughout
this documentation to ensure safe and proper use of the product. For clarifi cation,
they are explained in the sections below.
1.3.1 Safety instructions
This documentation contains safety instructions in chapter 2.6
"Product-specifi c safety instructions" and in chapter 3 "General instructions on
property damage and product damage", as well as before a sequence of actions or
an instruction for action involving a risk of personal injury and property damage.
Always follow the measures for danger prevention associated with the use of this
product.
Document number
Document type
RE18324-40
Data sheet
Advertisement
Table of Contents
