About This Documentation; Change Record; Overview On Target Groups And Product Phases - Bosch Rexroth ctrlX CORE X7 Operating Instructions Manual

6 / 50

Overview on target groups and product phases

1

About this documentation

1.1

Change record

Table 1: Editions of this documentation
Edition
Edition 01
1.2 Overview on target groups and product phases
In the following illustration, the framed activities, product phases and target groups refer to the present
documentation.
Example: In the product phase "Mounting (assembly/installation)", the target group "Mechanic/electri-
cian" can execute the activity "install" using this documentation.
Product
Selection
phases
Presales Aftersales
Design engineer
Programmer
Technologist
Target
Process
groups
specialist
Select
Prepare
Activities
Design
Construct
Fig. 1: Assigning the present documentation to the target groups, product phases and activities of the
target group
This document instructs the technical staff of the machine manufacturer on how to safely perform the
mechanical and electrical installation and on how to commission the device.
Required qualification: Individual who is able to assess the tasks assigned and to identify possible
safety risks owing to qualification in the subject, knowledge and experience. The individual should also
be familiar with the standards and regulations.
Bosch Rexroth AG
Release date
2022-12
Mounting
Engineering
(assembly/installation)
Mechanic/
electrician
Commissioning engineer
Unpack Parameterize
Mount Program
Install Configure
Simulate
Note
First edition
Commissioning Operation
Programmer
Technologist
Process specialist
Machine
operator
Maintenance
technician
Service
Optimize Operate
Test Maintain
Remove
Create the
NC program
ctrlX CORE X7
Decommissioning
Mechanic/
electrician
Disposal company
Dismount
Dispose
faults
R911419122, Edition 01