Table of Contents
Advertisement
18/24
CHC Controller | Commissioning
Bosch Rexroth AG, RE 18324-41/2022-11-29
8 Commissioning
During all work for commissioning the control unit, observe the general safety
instructions and intended use detailed in chapter 2 "Safety instructions".
▶ When commissioning the control unit, the machine may pose unforeseen dangers.
Before commissioning the system, you must therefore ensure that the vehicle and
the hydraulic system are in a safe condition.
▶ The control unit is generally commissioned via a software application.
9 Operation
Use the control unit only within the performance range specifi ed in the
technical data.
Advertisement
Table of Contents
