About This Documentation; Validity Of The Documentation; Required And Supplementary Documentation - Bosch rexroth SB24 Manual

4/24

About this documentation

Table 1: Required and supplementary documentation
Title
Load-sensing control block SB24/34
Contains important information on the safe and proper transport, installation,
commissioning, maintenance and disassembly of the SB24/34 control block.
Technical data sheet
Contains the permissible technical data.
Please bear in mind that different technical data sheets apply depending
on the version:
Load-sensing control block SB24/34
Load-sensing directional valves in sandwich plate design SB24-EHS, SB34-EHS
Load-sensing directional valves in sandwich plate design SB24-M
Plates SB24, SB34
Hitch control valves EHR5, EHR24-EM2, EHR24-EHS
Bosch Rexroth AG, control block SB24/34, RE 66170-10-R/2019-05-15
1 About this documentation
1.1 Validity of the documentation
This documentation applies for load-sensing control blocks SB24/34
of Bosch Rexroth including the following control block segments:
• Connecting plate, end plate
• Control valves SB24-M, SB24-EHS and SB34-EHS
• Hitch control valves EHR24-EHS and EHR24-EM2
▶ Read this documentation completely and, in particular, the chapter 2
"Safety instructions" and the chapter 3 "General instructions on property and
product damage" in the related instruction manual 66170-B before you start
working with the product.

1.2 Required and supplementary documentation

▶ Only commission the product if the documentation marked with the book symbol
is available to you and you have understood and observed it.
For related documentation on the assembly and repair, please refer to the
above-mentioned manual and, if necessary, to
www.boschrexroth.com/mobile-hydraulics-catalog.
Document number Document type
66170-B Instruction manual
Data sheet
66170
66171
66172
66173
66126