Troubleshooting Acl; Insufficient Hardware Resource For Acls; Symptom; Troubleshooting Flowchart - H3C S6805 Series Troubleshooting Manual

Troubleshooting ACL

This section provides troubleshooting information for common issues with ACLs.

Insufficient hardware resource for ACLs

Symptom

ACL application fails and the system displays a message "Reason: Not enough hardware resource."

Troubleshooting flowchart

Figure 2 Troubleshooting insufficient hardware resource for ACLs
ACL application
failure
Insufficient hardware
resources reported
Delete unnecessary ACLs
Issue resolved?
Yes
End

Solution

To resolve the issue:
1. Execute display qos-acl resource command to view ACL resource usage information.
<Sysname> display qos-acl resource
Interfaces: WGE1/0/1 to WGE1/0/24, HGE1/0/25 to HGE1/0/28 (slot 1)
---------------------------------------------------------------------
Type
---------------------------------------------------------------------
VFP ACL
IFP ACL
IFP Meter
No
Contact the support
Total Reserved
1024 257
18432 9220
3072 97
10
Configured Remaining
1 766
2 9210
1 2974
Usage
25%
50%
3%