Features
Direction
4.4 Power On
The power switch is on the right corner of the rear panel of T5+. Use it to
power the T5+ on or off.
Power Method
There are two methods for powered T5+ as below:
Method 1: Powered by battery. There is a built-in bidirectional battery
slot at the rear panel of the monitor. It supports both SONY NP-F
series and Canon LP-E6 batteries. (6V ~ 8.4V)
Method 2: Powered by DC power input. Use smart phone charger or
power bank to connect external power through the Micro USB DC IN
interface. (5 ~ 17VDC)
Power On Operation
First, install the battery or connect the power cord.
Operation
menu.
Figure 4.4-1 Power Switch
18