Page 1
Electric Dual Motor Desk Frame Instruction Manual SKU: DESK-V122EB/EW Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v122eb GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com...
Page 2
WARNING! ASSEMBLY STEPS If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may STEP 1 cause damage or serious injury.
Page 3
STEP 3 STEP 5 Place the assembled frame upside down on the desktop. Adjust width as needed. If not using a VIVO Insert Crossbar (F) into Left Crossbar (A) and Right Crossbar (B). Adjust the desk frame assembly to desktop with pre-drilled holes, drill 10mm deep pilot holes using a 1/8” (3mm) drill bit. Secure the the desired length and then insert M6x11 Screws (S-A) into Left Crossbar (A) and Right Crossbar (B).
Page 4
STEP 6 Connect AC Adapter (I) and cables from Legs (D) to Control Panel (H), as shown below. Turn the CAUTION! desk right side up and plug AC Adapter (I) into an AC power outlet. Manage cables using Cable Clips (J). Refer to Controller User Guide for operational instructions. Do not exceed desk Keep area of vertical Keep weight on desk...
Page 5
: 1HR 8M (within office hrs) - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...
Need help?
Do you have a question about the DESK-V122EB and is the answer not in the manual?
Questions and answers