Advertisement
Quick Links
Black Electric Dual Motor Desk Frame
Instruction Manual
SKU: DESK-V120EB
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-v120eb
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303
Advertisement
Related Manuals for Vivo DESK-V120EB
Summary of Contents for Vivo DESK-V120EB
- Page 1 Black Electric Dual Motor Desk Frame Instruction Manual SKU: DESK-V120EB Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v120eb GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...
-
Page 2: Electrical Safety Instructions
WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. -
Page 3: Tools Needed
TOOLS NEEDED Phillips Screwdriver DO NOT EXCEED WEIGHT CAPACITY. 220lbs Failure to do so may result in serious injury. (99.79kg) ASSEMBLY STEPS STEP 1 Loosen, but do not remove, screws in legs (6). Tilt legs up and into frames and secure each leg with two M6x16 screws (C) using Allen wrench (E). - Page 4 STEP 2 Turn assembled legs with frames right side up, then slide the crossbars (9) into the frames. Attach the side brackets (3) to the frames using four M6x16 screws (C) and tighten with the Allen wrench (E). STEP 3 Adjust the width of the frame to fit your desktop.
- Page 5 STEP 4 Attach your desktop (1) to the assembled desk frame using eight M5x16 screws (A).
- Page 6 STEP 5 Remove the protective film from the control panel (2). Mount the control panel and control unit (8) to the underside of the desktop using four M5x16 screws (A). Use the extension cords (5) to connect the motors to the control unit, then connect the control panel and power cord (4). Attach cable clip (F) where desired.
- Page 7 CAUTION! Do not exceed desk weight limit. Keep area of vertical motion free of obstacles. Keep weight on desk balanced for Leave enough slack in cables to correct operation and longer life of allow for full range of vertical components. motion.
- Page 8 - 92% within < 3hr www.vivo-us.com AVG. RESOLUTION TIME : < 15 M (within office hrs) Chat live with an agent! 309-278-5303 AVG. RESOLUTION TIME : 5M 4S (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...