Vantrue Element 3 User Manual page 32

5 levels. You can adjust according to your habits, as well as the surround-
ings of the car.
EN EN
When the Collision Detection is turned on, and no movement is detected
after 5 minutes of recording (5-minute entry mechanism for short), then
Collision Detection is activated with a Collision Detection icon at the
bottom right corner of the screen, and the camera automatically turns off.
When the dash cam is turned off, it will start to record for 1 minute after
being shaken, then turn off the dash cam again.
Note:
If the dash cam continues to be hit during the collision detection record-
ing, it will exit the collision detection mode and enter normal recording,
restarting the 5-minute entry mechanism.
Motion Detection
When the motion detection is turned on, the
the recording interface, indicating that the dash cam is currently in motion
detection mode. Motion detection has three levels: low/medium/high
that can be adjusted, and the corresponding detection ranges for motion
detection is 6.6ft/13ft/19.7ft.
1440P+1080P+1080P 30FPS
00:00:37 14:39:07 02-10-2023
- 28 -
35
MP/H
icon will be displayed on