Vantrue Element 3 User Manual page 23

-Audio Recording: The default is ON. Set recording to on or off.
-Exposure: The default value is +0.0. Adjust the exposure of the lens.
-REC Status Light: Default setting is ON. You can choose to turn on/off the
N E N N E N E E
recording status light.
-WDR: Default is ON. For a better-balanced video effect, you can choose
to turn it off. This function is only for front and interior lenses.
-Rear HDR: The default is ON. Set recording to on or off.
-Rotate Display: Default is off. You can choose to flip the video screen up
and down(180 degrees).
-Cabin Mirror: The default is ON. If you turn it on, the internal recording
screen is displayed in mirror mode.
-Rear Mirror: The default is ON. If you turn it on, the rear recording screen is
displayed in mirror mode
-Number Plate: Select the number or letter to be set. After setting, your
license plate number can be displayed in the recorded video.
-Stamp: Enable or disable the watermark stamp on video and photos. The
watermark stamp includes time and date label, VANTRUE label, license
plate number, GPS location information, and speed label. All enabled by
default.
-Time Lapse: The default value is disabled. You can choose to enable
1FPS/5FPS/10FPS/15FPS.
-Parking Mode: You can choose the parking mode you need, including
Collision Detection/Motion Detection/Low Bitrate Recording/Low Framer-
ate Mode/OFF.
-Low-light Night Vision in Parking Mode: Default is on. When turned on, it
can optimize the recording effect of videos in parking mode.
-Mileage statistics: The default is on, and the GPS mileage information will
be stored in the memory card, and customers can view it on the comput-
er or export the file through the mileage statistics function in the APP.
-GPS Settings: GPS is enabled by default. GPS ON/OFF settings, speed unit
settings, and GPS information are all set here.
- 19 -