Vantrue Element 3 User Manual page 33

1440P+1080P+1080P 30FPS
N E N N E N E E
35
00:00:37 14:39:07 02-10-2023 MP/H
When the motion Detection is turned on, and no movement is detected
after 5 minutes of recording, then an orange icon will appear in the
center of the screen, and the screen will turn off after 3 minutes.
When the front camera detects the movement of an object, it will
automatically start recording for 30 seconds and save the recording in
the usual video folder.
Note:
Motion detection mode can only be engaged when the camera is
turned on. Once the camera is turned off, the motion detection mode
will not work.
Low Bitrate Recording
When Low Bitrate recording is enabled, the icons or will be
displayed in the lower right corner of the screen, depending on whether
you choose 1080P 15FPS or 720P 15FPS.
If no movement is detected after 5 minutes of recording, there will be a
icon that appears in the center of the screen. The resolution of all
current video will be automatically switched to 1080P 15FPS or 720P 15FPS
for recording, and the recording duration will be determined according
to the currently set loop recording duration. When the camera is vibrates
or is moved, it will automatically exit, wait 5 minutes, and enter again.
- 29 -