ZKTeco UHF10 Pro User Manual

Reader

Hide thumbs Also See for UHF10 Pro:

User manual (27 pages)

page of 26

/ 26
Bookmarks

Quick Links

Download this manual

Product Name and Model Number

User Manual

UHF5 Pro/UHF10 Pro Reader

Date: August 2024

Doc Version: 1.1

English

Thank you for choosing our product. Please read the instructions

carefully before operation. Follow these instructions to ensure that the

product is functioning properly. The images shown in this manual are for

illustrative purposes only.

P a g e

| 1

For further details, please visit our Company's website

www.zkteco.com.

User Manual

Need help?

Do you have a question about the UHF10 Pro and is the answer not in the manual?

Questions and answers

Summary of Contents for ZKTeco UHF10 Pro

Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 2 User Manual Copyright © 2024 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company"...
Page 3 The entire risk as to the results and performance obtained from using the information is assumed by the user. ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including,...
Page 4 Tangxia Town, Dongguan, China. Phone +86 769 - 82109991 +86 755 - 89602394 For business related queries, please write to us at: sales@zkteco.com. To know more about our global branches, visit www.zkteco.com. P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 5 UHF5 Pro/UHF10 Pro Reader User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
Page 6 MAIN INTERFACE ....................10 5.1.2 RS485 SETTING INTERFACE ................14 5.1.3 SYSTEM SETTINGS ....................16 ACCESS CONTROLLER CONNECTION ......... 18 INSTALLATION PROCEDURE ............19 WIRING DIAGRAM ............... 22 FAQ ....................22 P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 7 User Manual Overview UHF5 Pro/UHF10 Pro is the ZKTeco’s third generation UHF reader which has a more stable performance, longer reading distance and faster recognition speed. It is equipped with a passive UHF card, which could be widely used in Vehicle management and Personnel management applications.
Page 8 Side View & Wiring Mounting Bracket Cables Colour Connection DC +12V Black Green Wiegand D0 White Wiegand D1 Purple Trigger Point Gray Connect to PC Brown RS485+ Orange RS485- P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 9 -20℃ to 65℃, <85% Temperature and Humidity Storage -20℃ to 80℃, <85% Temperature and Humidity RS485 Optional baud rate (9600, 19200, 38400, 57600, Communication 115200). The default is 115200 P a g e Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 11 UHF5 Pro/UHF10 Pro Reader User Manual Software Configuration Introduction 5.1.1 Main Interface Take the operation of the American standard reader as an example: P a g e | 10 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 12 Click Read Always to make the Reader always in the read status. Click Read by Trigger to enable the reader to read only after it is triggered. RF Settings The RF Settings helps to set the Power and Frequency values. P a g e | 11 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 13 (customers need not set). Output Duration Setting The time of continuous output signal of the reader can be set, and the maximum setting time is 1s. P a g e | 12 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 14 The default Wiegand format is WG26, and it can be set as WG34, WG42, WG50, WG58, WG66, WG74, WG82, WG90, WG98. Card Reading Interval Setting You can set the card reading interval to prevent the repeated card reading. P a g e | 13 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 15 The default Baud rate is 96000 and it can be adjusted as per the requirements. Device Address Setting The Device Address Setting is used to distinguish the readers which are installed in different locations. P a g e | 14 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 16 Click Forward Output to read the card number in the partition in the progressive order, and click Inverted Output to read out the card number in the partition in the reverse order. P a g e | 15 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 17 The LED indicator color can be set in the Standby Status and the Read Card Status. There are seven colors to choose. System Settings Set the location of the data import and export. P a g e | 16 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 18 There are 2 Card Reader output modes namely Wiegand Mode and RS485 mode. Language Settings Right click in the blank area of the Demo interface, a pop-up appears as shown below, click Language Settings to select the language. P a g e | 17 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 20 The distance between the reading head and the parking barrier must be maintained at 50cm or more. Avoid installing the reader opposite to each other. P a g e | 19 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 21 The reader detection distance may vary depending on climatic conditions such as rain, snow or wind. The Reader should be away from any strong magnetic field while working. P a g e | 20 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 22 Data Storage: 32-bit TID, 64-bit Unique TID, Parking 96-bit EPC, 512-bit User, etc. Support Protocol: EPC global class 1 Gen2 / Parking ISO18000-6C lot label Product size: 100.0x23.2x0.4mm P a g e | 21 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 23 What to do if the recognition distance of the reader is too close?  Try the following possibilities: Connect the demo, and then adjust the power to the maximum.  P a g e | 22 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 24 If the manual card reading does not respond, there is a problem with the reader. If the manual card reading fails after the factory reset, replace the reader. Determine whether the tag is our product, replace the tag test.  P a g e | 23 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 25 If so, check whether the output port of the controller relay signal is connected to the brake in a wrong manner or connected to another output port. P a g e | 24 Copyright©2024 ZKTECO CO., LTD. All rights reserved.
Page 26 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone: +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2024 ZKTECO CO., LTD. All Rights Reserved.

This manual is also suitable for:

Uhf5 pro Uhf5e pro Uhf5f pro Uhf10e pro Uhf10f pro